The SMP paper plate making machines offer maximum flexibility and ease of operation. Press speed, dwell time, opening speed, and opening time, stroke length and temperature are independently adjustable. An automatic counting and piling device comes as standard on all machinery. The device will collect the products in piles of pre-set numbers and present them on a roller table for inspection, further processing or packing.
SMP400: Paper plate making machine with a single cavity-forming tool. Uses blanks
SMP400: Paper plate making machine with a single cavity-forming tool. Uses blanks
Additionally, we offer a wide variety of cutting and forming tools, each with their own heating and heating control. This unique system enables the use of high temperatures on the cardboard side of the blank, limiting the heat on the coated side of the blank.
Every SMP machine combines high productivity and minimum of workforce requirements to provide optimal efficiency and profitability, also for small orders and short production runs.
The SMP100-R is similar to the SMP700-R: it works from a reel, has an integrated cutting and creasing unit and can process laminated or coated material. A staggered cutting pattern limits the volume of cut-off waste.
Cutting and pre-creasing of blanks are performed by low-cost steel rule dies, which are easy to re-align.
| MACHINE TYPE | SMP1000-R |
| Servo-mechanical press | |
| Multi cavity-forming tools | |
| Working from | Reel |
| Blank size mm | Single die max. Ø510 or 1000 x 510 |
| Double die max. Ø490 or 490 x 510 | |
| Triple die max. Ø320 or 320 x 510 | |
| Four dies max. Ø240 or 240 x 510 (Option) | |
| Five dies max. Ø190 or 190 x 510 (Option) | |
| Drawing depth mm | 55 mm max |
| Speed | 56 max. strokes/min. |
| Pressforce kN | 150 |
| Board calliper gsm | 250-600 |
| Power consumption | 25 kWh |
| Floor space mm | 8500 x 1700 |
For larger production volumes we offer the SMP700-R paper plate making machines. They work from a reel and have an integrated cutting and creasing unit.
Laminated or coated material can be used. The volume of cut-off waste is reduced to a minimum by a staggered cutting pattern.
| MACHINE TYPE | SMP700-R |
| Servo-mechanical press | |
| Multi cavity-forming tools | Reel |
| Working from | Single die max. Ø510 or 700 x 510 |
| Blank size mm | Double die max. Ø340 or 340 x 510 |
| Triple die max. Ø220 or 220 x 510 (Option) | |
| Drawing depth mm | 55 mm max |
| Speed | 56 max. strokes/min. |
| Pressforce kN | 100 |
| Board calliper gsm | 250-600 |
| Power consumption | 16 kWh |
| Floor space mm | 8500 x 1400 |
Big brother to the SMP700 and the SMP400, this paper plate making machine sports up to five tools. Similarly, the blanks from which the products are formed, must be pre-cut and creased on a separate cutting machine.
| MACHINE TYPE | SMP1000 |
| Servo-mechanical press | |
| Multi cavity-forming tools | Blanks |
| Working from | Single die max. Ø510 or 1000 x 510 |
| Blank size mm | Double die max. Ø490 or 490 x 510 |
| Triple die max. Ø320 or 320 x 510 | |
| Four dies max. Ø240 or 240 x 510 (Option) | |
| Five dies max. Ø190 or 190 x 510 (Option) | |
| Drawing depth mm | 55 |
| Speed | 56 max. strokes/min. |
| Pressforce kN | 150 |
| Board caliper gsm | 250 - 1000 |
| Power consumption | 13 kWh |
| Floor space mm | 5500 x 1400 |
This paper plate making machine can be equipped with large single tools or two to three smaller dies side by side. These are installed on a manifold plate, enabling easy tool change of the complete set, or allowing to change only one tool. The heated tools are separated from direct contact with the manifold by high resistant insulation plates.
Similarly to the SMP400, the blanks from which the products are formed, must be pre-cut and creased on a separate cutting machine.
| MACHINE TYPE | SMP700 |
| Multi cavity-forming tools | Blanks |
| Working from | Single die max. Ø510 or 700 x 510 |
| Blank size mm | Double die max. Ø340 or 340 x 510 |
| Triple die max. Ø220 or 220 x 510 (Option) | |
| Drawing depth mm | 55 |
| Speed | 56 max. strokes/min. |
| Pressforce kN | 100 |
| Board caliper gsm | 250 - 1000 |
| Power consumption | 13 kWh |
| Floor space mm | 5500 x 1400 |
The SMP400 paper plate making machine is a single tool press. The blanks from which the products are formed must be pre-cut, and creased if required, on a separate cutting machine.
| MACHINE TYPE | SMP400 |
| Blank fed Single cavity-forming tools | |
| Working from | Blanks |
| Blank size mm | Max. Ø 400 or 400 x 400 |
| Drawing depth mm | 55 |
| Speed | 60 max. strokes/min. |
| Pressforce kN | 60 |
| Board caliper gsm | 250 - 1000 |
| Power consumption | 10 kWh |
| Floor space mm | 2500 x 1100 |
